
LUXION RF433 single two-way touch switch mechanism
Single two-way touch switch mechanism with RF433, for LUXION glass frames and panels, controllable by RF remote control.
Code: LX-MT-R102
Datasheet (PDF)| Colour | Code | EAN |
|---|---|---|
| – | LX-MT-R102 | 0658606019782 |
Description
The Luxion single two-way switch mechanism with RF433 can be fitted on its own in a Luxion panel or together with other Luxion sockets and switches in a Luxion glass frame. It allows one light fitting to be controlled from two points.
Compatible only with LUXION glass frames and panels.
It is controlled with the LUXION RF remote control or with the switch-type RF remote control.
Please note: remote controls are sold separately!
Features
LUXION single two-way touch switch mechanism with RF433 support, for controlling one light fitting from two points.
- Single switch mechanism
- Two-way connection
- LED indicator: blue when the light is on, dim blue when it is off
- 4 mm thick safety glass
Control with RF433 remote control
The switch can also be controlled remotely with LUXION RF433 remote controls.
- LUXION RF remote control
- Switch-type RF remote control
- Remote controls are sold separately
Not included
The mechanism is fitted into a LUXION glass frame or panel, available separately.
- Glass panel (not included)
- Metal frame (not included)
Dimensions
The mechanism is fixed with a screw system.
- Fixing screw spacing: 60 mm
- Width: 50 mm
- Height: 50 mm
- Depth: 5 mm + 26 mm
- Side height: 49 mm
Installation / wiring diagram
Two mechanisms are connected to each other for a two-way circuit. The live (L) supplies both mechanisms, while the lamp is connected between L1 of the first mechanism and the neutral (N). The two mechanisms are linked with a two-way connecting cable.
- Connections: live (L) and neutral (N)
- Terminals: L1 and L(A)
- Two-way / intermediate connection
- Two-way switch function with remote control (2Way Remote Switch)
- Wiring must be carried out strictly according to the product's wiring diagram
- Connect A to A and B to B, without crossing, otherwise the switch will not work or may be damaged
- Do not install while live







