TP618RF wireless thermostat with receiver for gas or electric boiler, LCD display and memory LUXION
Wireless RF thermostat with receiver for gas or electric boilers, with touch buttons, LCD display, weekly programming and memory.
Code: TP618RF
Datasheet (PDF)| Colour | Code | EAN |
|---|---|---|
| – | TP618RF | – |
Description
The Luxion TP618RF wireless thermostat works with gas boilers or electric boilers. It features RF wireless connection, touch buttons, an LCD display, weekly programming, a memory function and frost protection. From the menu you can set the thermostat's operating periods to suit your daily schedule, both on weekdays and at the weekend.
- Memory function: the thermostat automatically saves your settings and retains them even after a power cut.
- Programming: set it as you wish, e.g. 22°C during the day from 9:00 to 17:00 and 25°C at home from 17:00 to 9:00. 5+1+1-day programming, with 6 time slots per day.
- Thermostat lock: lock the thermostat so that children cannot change the settings.
- Frost protection: the system continuously monitors the room temperature and, when it drops below 10°C, automatically switches on the heating to prevent the water in the heating system from freezing.
Luxion TP618RF wireless thermostat with receiver
Wireless thermostat with receiver, for gas boilers or electric boilers.
LCD display
The thermostat has a large black backlit LCD display, touch buttons and weekly programming functions.
- ON mode
- STAND-BY mode
Low consumption
The thermostat is powered by 2 AA batteries and is optimised for low consumption. For this reason the display goes into stand-by mode after approximately 13 seconds.
Thermostat lock
Lock the thermostat so that children cannot tamper with it.
- Press the ∧ and ∨ buttons for 7 seconds to lock / unlock
A more comfortable home with programming
Set the thermostat's operating periods to suit your daily schedule. Enter the device menu and select the operating times for weekdays and the weekend, with 6 time slots per day.
- 5+1+1 weekly programming
- Automatic saving of settings, retained even after a power cut
Frost protection
The frost protection system continuously monitors the room temperature. When it drops below 10°C, the thermostat automatically switches on the heating system so that the water in the heating system does not freeze.
Display indicators and buttons
- Battery level
- RF
- Thermostat lock
- Days
- Room temperature (RT)
- Set temperature (SET)
- Floor temperature (FLOOR)
- ECO mode
- Manual mode
- Programmes
- Settings
- Programmed period
- Time
- Buttons: ON/OFF, Time, Menu, Up, Down
Structure / components
The set consists of the thermostat, powered by 2 AA batteries, and the wall-mounted receiver.
- Receiver: setting button (Set)
- Receiver: Power, Load, RF, WIFI LED indicators
- Receiver: N1, N, L, L1 terminals
Dimensions
- Thermostat: 86 x 86 x 28 mm
- Receiver: 86 x 86 x 28 mm
Wiring diagram
The receiver connects to the water heating circuit or to the boiler via the NC, NO and COM relay contacts.
- NO: normally open contact
- COM: common contact
- NC: normally closed contact
- Water heating: NC, NO, COM (220VAC 3A), N - AC220V-N, L - AC220V-L
- Boiler: NC, NO, COM (220VAC 3A) to the boiler, N, L - AC220 power supply
Installation
- Step 1: Open the receiver's front cover by gently inserting the tip of a screwdriver
- Step 2: Fix the receiver with the two screws and connect the wires according to the wiring diagram
- Step 3: Place the thermostat on a desk or fix it to the wall
Dimension drawing
